Configuring the Pro Dumbwaiter

Single Opening Front

Single Opening Left

Single Opening Right

Straight Through [add$1126.65]

90 Degree Left [add$1229.10]

90 Degree Right [add$1229.10]
- STOPS
- 2 Stops
- 3 Stops
[add $832.00] - 4 Stops
[add $1664.00]
- STAINLESS STEEL CAR 304 #4 FINISH
- Additional Lead Time Required
- Stainless Steel – 20″W x 20″D x 30″H
- Stainless Steel – 30″W x 30″D x 30″H
[add $945.45] - Custom Stainless Steel Cars can add up to 6 weeks to build time
- Custom Stainless Steel Car – Up to 30″W x 30″D x 36″H (enter dimensions below)
[add $2080.00]
- CUSTOM CAR WIDTH, DEPTH & HEIGHT (CLEAR)
- Inside Clear Dimensions are in Whole Inches Only
- Width (min. 16″ – max. 30″)
- Depth (min. 16″ – max. 30″)
- Height (min. 30″ – max. 36″)
- OPTIONS
- 3rd Stainless Steel Shelf (2 Included)
[add $208.00] - Gate Switch on Car Gate
[add $832.00] - AC Automatic Car Light (Battery Light Included)
[add $520.00]
- POWER OPTIONS
- AC
- DC
- TRAVEL MEASUREMENTS
- Bottom Floor Sill Height (typical 36″)
- Min Sill Height at Lowest Landing is 18″ for a 30″ Cab Height & 22″ for a 36″ Cab Height
- Total Travel Bottom Floor to Top Floor (up to 50′) (distance in inches)
- Top Floor Sill Height (typical 36″)
- Overhead requirements are 90″ & 96″ respectively for 30″ & 36″ cab heights based on a 36″ sill height at top landing
- For each inch above 36″ Top Floor Sill Height, add an additional inch to the overhead requirement.
- Elevation Notes
- TOTAL TRAVEL
- Up to 12.5′ (150″)
- Up to 17.1′ (205″) 55″ Extension x 1
[add $433.35] - Up to 21.7′ (260″) 55″ Extension x 2
[add $800.80] - Up to 26.3′ (315″) 55″ Extension x 3
[add $1,201.20] - Up to 30.8′ (370″) 55″ Extension x 4
[add $1,601.60] - Up to 35.4′ (425″) 55″ Extension x 5
[add $2002.00] - Up to 40.0′ (480″) 55″ Extension x 6
[add $2,402.40]
Hours of Operation:
Monday – Friday
9am – 5pm EST
Office: 416.628.8132
Toll Free: 855.888.0333
General Email: info@ameriglide.ca