Configuring the Express Plus Dumbwaiter

Single Opening Front

Single Opening Left

Single Opening Right

Straight Through [add$764.40]

90 Degree Left [add$1723.80]

90 Degree Right [add$1723.80]

     

  • DRIVE MACHINE LOCATION
  • Mount at Bottom (Recommended)
  • Mount at Top
  • TRAVEL MEASUREMENTS
  • Bottom Floor Sill Height (typical 36″)
  • Min Sill Height at Lowest Landing is 18″ for a 30″ Cab Height & 22″ for a 36″ Cab Height
  • Total Travel Bottom Floor to Top Floor (up to 50′) (distance in inches)
  • Top Floor Sill Height (typical 36″)
  • Overhead requirements are 90″ & 96″ respectively for 30″ & 36″ cab heights based on a 36″ sill height at top landing
  • For each inch above 36″ Top Floor Sill Height, add an additional inch to the overhead requirement.
  •  
  • TOTAL TRAVEL
  • Up to 12′
  • 12′ To 18′
    [add $314.60]
  • 19′ To 29′
    [add $679.90]
  • 30′ To 40′
    [add $941.20]
  • 41′ To 51′
    [add $1202.50]
  • STOPS
  • 2 Stops
  • 3 Stops
    [add $962.00]
  • 4 Stops
    [add $1,829.10]
  • CAR MATERIAL SELECTION
  • Laminate or Veneer
  • Stainless Steel (Skip down to “Stainless Steel Car Options”)
  • CAR MATERIAL – LAMINATE OR VENEER
  • White Laminate
  • Unfinished Maple
  • Unfinished Cherry
    [add $314.60]
  • Unfinished Mahogany
    [add $314.60]
  • Unfinished Oak
    [add $314.60]
  • CAR FINISH FOR WOOD SPECIES
  • Leave Wood Car Material Unfinished (Stain Ready)
  • Clear Coat Finish for Car
    [add $471.90]
  • Standard Stain for Car – Natural 209 (Includes Clear Coat)
    [add $941.20]
  • Standard Stain for Car – Sedona Red 222 (Includes Clear Coat)
    [add $941.20]
  • Standard Stain for Car – Classic Gray 271 (Includes Clear Coat)
    [add $941.20]
  • Custom Stain for Car (Includes Clear Coat)
    [add $1149.20]
  • All Dimensions are Clear
  • Capacity: 200 Lbs. for Car up to 24″W and 24″D – 300 Lbs. for Car Over 24″W and/or 24″D
  • 20″W x 20″D – Standard
  • 24″W x 24″D – Standard
  • 30″W x 30″D – Standard – 300 Lb. Capacity
    [add $1097.20]
  • * Refer to the Technical Drawing Document to See Available Custom Options *
  • Custom – Smaller than 20″W x 20D (Enter Dimensions Below) – Additional Lead Time Required
  • Custom – Larger than 20″W x 20D (Enter Dimensions Below) – Additional Lead Time Required
    [add $210.60]
  • Custom Oversize – Over 24″W and/or Over 24″D (Enter Dimensions Below) – 300 Lb. Capacity – Additional Lead Time Required
    [add $1097.20]
  • STAINLESS STEEL CAR SIZE OPTIONS
  • No Stainless Steel Car (make Car Material Selection above)
  • 304 Grade Stainless Steel, #4 Brushed Finish (Dimensions are Clear)
  • Additional Lead Time Required
  • Stainless Steel – 20″W x 20″D x 30″H – 200 Lb. Capacity
    [add $3788.20]
  • Stainless Steel – 24″W x 24″D x 30″H – 200 Lb. Capacity
    [add $4031.30]
  • Stainless Steel – 30″W x 30″D x 36″H – 300 Lb. Capacity
    [add $4137.90]
  • Custom Stainless Steel Cars can add up to 6 weeks to build time
  • Custom Stainless Steel Car – Up to 24″ Wide or Deep (enter dimensions below)
    [add $5,582.80]
  • Custom Stainless Steel Car – Over 24″ Wide or Deep (enter dimensions below)
    [add $7017.40]
  • CUSTOM CAR WIDTH & DEPTH (CLEAR) – ALL MATERIALS
  • * Refer to the Technical Drawing Document to See Available Custom Options *
  • Inside Clear Dimensions are in Whole Inches Only
  • Width (min. 14″ – max. 30″)
  • Depth (min. 14″ for Rear Rail / min. 17″ for Side Rail – max. 30″)
  •  
  • CAR HEIGHT (CLEAR) – ALL MATERIALS
  • 30″ High
  • 36″ High
  • CALL-SEND CONTROL OPTIONS
  • “Car Here” Indicators (Included)
  • Keylocks (per lock)
    [$158.60 each]
  • OPTIONS
  • Automatic In-Car Light
    [add $574.60]
  • Float Level Switch
    [add $679.90]
  • Machine Room Access Door – Kill Switch
    [add $158.60]
  • Gate Switch on Car Gate
    [add $574.60]
  • No Door & No Track (Not Recommended – Only for Low Overhead Space Installs)
  • Second Shelf – Laminate or Veneer
    [add $158.60]
  • Second Shelf – Stainless Steel
    [add $252.20]
  • Straight Through and 90 Degree Cars with Multiple Openings on the Same Landing May Require Additional Locks and Call/Send
  • Additional Right Hand Locks Required (One Provided Per Landing)
    [$471.90 each]
  • Additional Left Hand Locks Required (One Provided Per Landing)
    [$471.90 each]
  • Additional Call / Send Required (One Provided Per Landing)
    [$115.70 each]

Hours of Operation:

Monday – Friday

9am – 5pm EST

Office:      416.628.8132

Toll Free: 855.888.0333

General Email: info@ameriglide.ca